MAJIC Series Supported Products Guide

Datasheets

 EDB

EPI C Source-level GUI Debugger

 

EDB RTOS-awareness

Integrated NucleusPlus Debug Support

Customizing Integrated RTOS Support

 
MAJIC (Multi-processor Advanced JTAG Interface Controller)

MAJIC-LT   including GNU GDB support

MAJIC-LX   including EPI OpenDebug™ software support

MAJIC-MT   with multi-core, OpenDebug™ and trace upload support for Intel XScale® PCA processors

Application Notes

EDT Software and MAJIC® Probe Update Procedures (filename: appnote_majic_update.pdf)

Step-by-step instructions for installing EDT software updates, service packs, MAJIC® firmware updates, and changing the MAJIC-Plus® Trace Control PLD, using a PC running a Microsoft Windows operating system. Linux customers should refer to the Using a MAJIC® Probe With A Linux PC for equivalent information.

Using a USB Ethernet Adapter with a MAJIC® Probe (filename: appnote_usb_ethernet_adapter.pdf)

Covers how to configure your MAJIC® probe to work with a USB to Ethernet Adapter connected to a PC running a Microsoft Windows operating system.

Using A MAJIC® Probe with Intel® SDT (filename: appnote_majic_intel_sdt.pdf)

Instructions for configuring and using a MAJIC® probe with version 1.2 of the Intel® C++ Software Development Tool Suite for Palm OS, Symbian OS, Nucleus OS, and OS independent systems. See also Using A MAJIC® Probe with Intel XScale® Microarchitecture for additional information on MAJIC® support for the Intel XScale® microarchitecture.

Using a MAJIC® Probe With A Linux PC (filename: appnote_majic_linux.pdf)

Instructions for installing and using the EDT software package and GNU GDB on a PC running a Linux operating system. Additional information on setting up and using GDB with a MAJIC® probe is provided in the GDB readme.txt file of the distribution package.

Using a MAJIC® Probe in a Cygwin Environment (filename: appnote_majic_cygwin.pdf)

Instructions for configuring and using the EDT software package and GNU GDB in a Cygwin environment. Additional information on setting up and using GDB with a MAJIC® probe is provided in the GDB readme.txt file of the distribution package.

Using a MAJIC® Probe With MontaVista Linux (filename: appnote_majic_mvista.pdf)

Explains the steps necessary to configure and use MontaVista software tools with a MAJIC® probe. It provides specific information on:

• Connecting a MAJIC® probe with GDB to debug the MontaVista Linux Kernel. See also Using a MAJIC® Probe With A Linux PC and the GDB readme.txt for additional information on using GDB with a MAJIC® probe.
• Setting up the debug environment for simultaneous kernel-level (including loadable modules) and application-level debug.

Using A MAJIC® Probe with Intel XScale® Microarchitecture (filename: appnote_majic_xscale.pdf)

Discusses special considerations that arise when using a MAJIC® probe with processors based on Intel XScale® technology. See also Using A MAJIC® Probe with Intel® SDT for additional information on using a MAJIC® probe MAJIC® Probe with Intel® SDT with the Intel® Software Development Tool Suite.

Using the EPI Flash Programming Utility (filename: appnote_epiflash.pdf)

Explains how to program the flash memory on your target board using a MAJIC® probe and the flash utility included in the EDT software package.

Customizing EDB's RTOS Integration Support (filename: rtos_customize.pdf)

Covers how to port EDB's RTOS integration DLL to currently unsupported or custom RTOSs.

 

MAJIC® Support for Multi-TAP JTAG Configurations (filename: appnote_majic_multi-tap.pdf)

Describes how a MAJIC® probe manages complex JTAG configurations, and provides specific recommendations for designing a multi-TAP device. Also provides a good overview of basic JTAG operation and connection.

MAJIC® Support for Hardware Emulation Systems (filename: appnote_majic_hw_emulation.pdf)

Explains the special considerations that arise when using a MAJIC® probe with a simulation model running on a hardware emulation system.

MAJIC Interface Specifications

MAJIC® Interface Specifications for ARM Debug Interface and Intel XScale® Technology (filename: appnote_majic_specs_arm_xscale.pdf)

Documents the debug connector details and recommended part numbers, electrical specifications for the JTAG and ETM interfaces, and discusses other board design considerations.

MAJIC® Interface Specifications for MIPS EJTAG Debug Interface (filename: appnote_majic_specs_ejtag.pdf)

Documents the EJTAG connector details and recommended part numbers, electrical specifications for the JTAG and PCTrace interfaces, and discusses other board design considerations.